Arctic Cat 6 tower big pin clutch with a 30mm long taper and a 8.25″ diameter
OEM Arctic Cat replacement clutch
This clutch has metric puller threads and will require the 0744-080 blue puller to remove it
Spider in this clutch is shimmed with 1 thick silver shim
Includes the clutch un-calibrated clutch assembly only
Does NOT include pins, nuts, set screws, or o-rings (4639-674 kit)
Does NOT include weights or spring, and will need them added for the correct model you put it on
When calibrating your clutch from small pin weights to big pin weights we suggest you go 1-2 grams heavier than your current weight, because the big pin weights carry more weight around the pin
Can be used on models that came with 8″ clutches, you will just not use the extra 0.25″ of sheave
Will work on the following Arctic Cat models:
2009 Bearcat 570
2007-2008 Crossfire 500
2007-2009 F5
2003-2006 Firecat 500
2009 F570
2005-2006 M5
2005-2006 Sabercat 500
2008-2009 T500
2009 T570
Please contact us if you are unsure if this will fit your model
Clutch directly replaces the following drive clutches:
0725-402
0725-445
0725-469
0725-504
0725-519
0746-139
0746-149
0746-177
0746-191
0746-209
0746-656
0746-761
0746-777