New
Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. The Signature Series Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products. The 2 Signature Series Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment. This kit contains a set of front spring spacers! 2 Signature Series Lift Kit Features: All hardware needed for successful installation logo precision laser cut into each kit User-friendly instructions Bolt-on application; takes approximately 1-2 hours for install Zinc plated for durability Front and rear lift NOTE: Be sure to always check CV boot clearance at strut housing during installation as you may have to grind the aluminum strut housing to create sufficient clearance for CV boots (even if you’re running stock CV axles). NOTE: For all 2011-2017 models Heavy Duty Aftermarket Rear Axles are REQUIRED to properly install this kit on any 2011-2017 Sportsman models/applications listed. NOTE: Models produced after August 2016 will require the purchase of front and rear axles for this kit to function properly. Front Axle part number HLA-P800-F (2ea) and Rear Axle part number HLA-RZR570-R (2ea) are required. This kit does not fit the Polaris X2 models. Tire Fitment: Polaris Sportsman 400 – Up to 29.5″ Polaris Sportsman 570 – Up to 29.5″ Polaris Sportsman 800 – Up to 29.5″ Polaris Sportsman 800 – Up to 29.5″ Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.